Spectra® HD Series IP Dome System HIGH DEFINITION PAN/TILT/ZOOM HIGH-SPEED DOME

Spectra® HD Series IP Dome System HIGH DEFINITION PAN/TILT/ZOOM HIGH-SPEED DOME Product Features • Up to 1280 x 960 Resolution • 4:3 or 16:9 Aspect Ratio; 960p at 20 Images per Second (ips), 720p at 30 ips • 1.3 Megapixel (MPx), 18X Optical, Wide Dynamic Range (WDR) Camera • Ability to Control and Monitor Video Over IP Networks • Built-in Analytics Including AutoTracking and Adaptive Motion Detection • 2 Simultaneous Video Streams: Dual H.264 and Scalable MJPEG • 360° Continuous Pan Rotation at 400° per Second • Supported Protocols: TCP/IP, UDP/IP (Unicast, Multicast IGMP), UPnP, DNS, DHCP, RTP, NTP, and More • Power over Ethernet (PoE) IEEE 802.3af • USB Expansion Slots for Alarms and Audio Accessories • 16 Preset Tours, 255 Dome Presets, 8 Privacy Zones • Open IP Standards • ONVIF v1.02 Conformant Network Dome System Pelco takes its industry-leading Spectra® Series dome into the world of high definition. Spectra HD delivers crystal-clear, live streaming images over the Internet using a standard Web browser (Microsoft® Internet Explorer® or Mozilla® Firefox®). With four times the resolution of standard definition domes, Spectra HD is an ideal solution to view details such as faces, license plates, tattoos, playing cards (in casinos), or other specific features. Spectra HD supports High-Profile H.264 compression, a vast improvement in quality over MPEG-4 and 20 times more efficient than M-JPEG. The dome system features open architecture connectivity for third-party software recording solutions allowing integration into virtually any IP-based HD system. It is also compatible with Digital Sentry® video management systems. As with all Pelco IP camera solutions, Spectra HD is Endura Enabled™ to record, manage, configure, and view multiple live streams. When connected to an Endura® HD network-based video security system, the dome system has access to EnduraStor™ and EnduraView™ for optimized image quality and bandwidth efficiency. Spectra HD features the same ease of installation and ease of maintenance that you have come to expect from Spectra. Each dome system consists of a back box, a dome drive, and a lower dome. Spectra HD includes a choice of four back box models: in-ceiling, environmental in-ceiling, pendant, and environmental pendant. All environmental models meet NEMA Type 4X, IP66 when properly installed. Built-In Analytics Pelco Analytics enhance the flexibility and performance of Spectra HD. Eight Pelco behaviors are preloaded and included as standard features. Pelco behaviors can be configured and enabled using a standard Web browser, and they are compatible with Endura or a third-party system that supports alarms using Pelco’s API. Web Interface Spectra HD uses a standard Web browser for powerful remote setup and administration. Window Blanking Window blanking is used to conceal user-defined privacy areas that cannot be viewed by an operator. Spectra HD supports up to eight blanked windows. A blanked area will appear on the screen as a solid gray window. Video Systemization Spectra HD easily connects to Pelco IP and hybrid systems such as Endura version 2.0 (or later) and Digital Sentry version 7.3 (or later). The camera is also compatible with Digital Sentry NVs (DS NVs), a full-featured video management software, which is available as a free download atwww.pelco.com. DS NVs includes four free Pelco IP licenses and allows for the management of video from up to 64 cameras. Spectra HD features open architecture connectivity to third-party software. Pelco offers an application programming interface (API) and software developer’s kit (SDK) for interfacing with Pelco's IP cameras.TECHNICAL SPECIFICATIONS PELCO ANALYTICS Spectra HD Series includes eight user-configurable behaviors. The camera is capable of running up to three behaviors at the same time; although, the number of behaviors is limited to the available processing power of the camera and the type of analytic being used. Note: Available processing power is determined by the settings for compression standards, resolution, image rate, bit rate, and analytic configuration. For each behavior, you can create several custom profiles that contain different camera settings. With these profiles, you can set up different scenarios for the behavior, which will automatically detect and trigger alarms when specific activity is detected. Pelco Analytics are configured and enabled using a standard Web browser, and Pelco behavior alarms are compatible with Endura or a third-party system that supports Pelco’s API system. Multiple Pelco behaviors can be scheduled to work during a certain time or condition. For example, during the day, a camera can be configured with Object Counting to count the number of people that enter a lobby door. At night, the operator can change the profile to Camera Sabotage to trigger an alarm if a camera is moved or obstructed. Available Pelco behaviors include: • Abandoned Object: Detects objects placed in a defined zone and triggers an alarm if the object remains in the zone longer than the user-defined time allows. An airport terminal is a typical installation for this behavior. This behavior can also detect objects left behind at an ATM, signaling possible card skimming. • Adaptive Motion Detection: Detects and tracks objects that enter a scene and then triggers an alarm when the objects enter a user-defined zone. This behavior is primarily used in outdoor environments with light traffic to reduce the number of false alarms caused by environmental changes. • AutoTracking: Detects and tracks movement in the camera’s field of view. When the AutoTracking behavior is configured, the system will automatically pan and tilt to follow the moving object until the object stops or disappears from the monitored area. • Camera Sabotage: Detects contrast changes in the field of view. An alarm is triggered if the lens is obstructed with spray paint, a cloth, or a lens cap. Any unauthorized repositioning of the camera also triggers an alarm. • Directional Motion: Generates an alarm in a high traffic area when a person or object moves in a specified direction. Typical installations for this behavior include an airport gate or tunnel where cameras can detect objects moving in the opposite direction of the normal flow of traffic or an individual entering through an exit door. • Loitering Detection: Identifies when people or vehicles remain in a defined zone longer than the user-defined time allows. This behavior is effective in real-time notification of suspicious behavior around ATMs, stairwells, and school grounds. • Object Counting: Counts the number of objects that enter a defined zone or cross a tripwire. This behavior might be used to count the number of people at a store entrance/exit or inside a store where the traffic is light. This behavior is based on tracking and does not count people in a crowded setting. • Object Removal: Triggers an alarm if an object is removed from a defined zone. This behavior is ideal for customers who want to detect the removal of high value objects, such as a painting from a wall or a statue from a pedestal. • Stopped Vehicle: Detects vehicles stopped near a sensitive area longer than the user-defined time allows. This behavior is ideal for airport curbside drop-offs, parking enforcement, suspicious parking, traffic lane breakdowns, and vehicles waiting at gates.TECHNICAL SPECIFICATIONS The following diagram illustrates how the camera system interprets streaming video when embedded analytics are configured and enabled. IMPORTANT NOTE: PLEASE READ. The network implementation is shown as a general representation only and is not intended to show a detailed network topology. Your actual network will differ, requiring changes or perhaps additional network equipment to accommodate the system as illustrated. Please contact your local Pelco Representative to discuss your specific requirements. SYSTEM SPECTRA VIDEO ANALYTICS OVERLAY • CONFIGURATION • ALARMS • PELCO APITECHNICAL SPECIFICATIONS SOFTWARE FEATURES • 255 Presets • 16 Tours • ±0.1° Preset Accuracy • Multilingual Menus (English, Spanish, Portuguese, Italian, German, French, Russian, Polish, and Turkish) • Password Protection • 400°/sec Pan Preset Speed and 200°/sec Tilt Preset Speed • Rotating Discreet Liner with Sealed Fixed Bubble • 8 Privacy Zones, Configurable in Size • “Auto Flip” Feature Rotates Dome 180° at Bottom of Tilt Travel • Configurable Park with Actions • Proportional Pan/Tilt Continually Decreases Pan/Tilt Speeds in Proportion to Depth of Zoom BACK BOX FEATURES NOTE: VALUES IN PARENTHESES ARE INCHES; ALL OTHERS ARE CENTIMETERS. In-Ceiling (Indoor) • Single Back Box for Suspended or Hard Ceiling Applications • Requires 13.35 cm (5.25 in.) Space Above Ceiling and 8.25 cm (3.25 in.) Below • Minimum Ceiling Thickness 1.27 cm (0.50 in.); Maximum 4.45 cm (1.75 in.) • Quick Disconnect to Dome Drive • Aluminum Construction • Suitable for Use in Environmental Air Handling Spaces Standard and Environmental Pendant • Standard and Environmental Models • Standard Pendant Available in Black or Gray Finish; Environmental Pendant Available in Gray Finish Only • Quick Disconnect to Dome Drive • Aluminum Construction • Environmental Model Includes Sun Shield, Fan, and Heater Environmental In-Ceiling • Single Back Box for Hard Ceiling Applications • Requires 11.18 cm (4.40 in.) Space Above Ceiling and 10.92 cm (4.30 in.) Below • Includes Heater and Fan • Minimum Ceiling Thickness 1.27 cm (0.50 in.); Maximum 4.45 cm (1.75 in.) • Quick Disconnect to Dome Drive • Aluminum Construction 13.2 (5.2) 19.0 (7.5) 20.8 (8.2) 15.0 (5.9) 8.8 (3.5) 21.8 (8.6) 15.0 (5.9) 26.9 (10.6) (ENVIRONMENTAL DOME WITH SUN SHROUD SHOWN) 25.2 (9.9) 11.0 (4.4) 15.0 (5.9) 21.8 (8.6) 10.9 (4.3)TECHNICAL SPECIFICATIONS CAMERA Sensor Type 1/3-inch CCD Optical Zoom 18X Maximum Resolution 1280 x 960 Lens f/1.6 (focal length, 4.7 ~ 84.6 mm optical) Aspect Ratios 4:3 or 16:9 Light Sensitivity f/1.6; 2,850°K; SNR >24dB Color (33 ms) 0.70 lux Color (250 ms) 0.07 lux Mono (33 ms) 0.25 lux Mono (250 ms) 0.02 lux Day/Night Capabilities Yes IR Cut Filter Yes IR Trace Curves 850 nm and 950 nm Wide Dynamic Range 60 dB Iris Control Auto iris with manual override Backlight Compensation Yes VIDEO Video Encoding H.264 High, Main, or Base profiles and MJPEG Video Streams Up to 2 simultaneous streams; the second stream is variable based on the setup of the primary stream Frame Rate Up to 30, 25, 24, 15, 12.5, 12, 10, 8, 7. 5, 6, 5, 4, 3, 2.5, 2, 1 (dependent upon coding, resolution, and stream configuration) Supported Protocols TCP/IP, UDP/IP (Unicast, Multicast IGMP), UPnP, DNS, DHCP, RTP, RTSP, NTP, IPv4, SNMP v2c/v3, QoS, HTTP, HTTPS, LDAP (client), SSH, SSL, SMTP, FTP, and 802.1x (EAP) Users Unicast Up to 20 simultaneous users depending on resolution settings (2 guaranteed streams) Multicast Unlimited users H.264 Security Access Password protected Software Interface Web browser view and setup Pelco System Integration Endura 2.0 (or later) Digital Sentry 7.3 (or later) Open API Pelco API or ONVIF v1.02 Minimum System Requirements Processor Intel® Core™ 2 Duo microprocessor, 2.6 GHz Operating System Windows® XP, Windows Vista®, or Mac® OS X 10.4 (or later) Memory 2 GB RAM Network Interface Card 100 megabits (or greater) Monitor Minimum of 1024 x 768 resolution, 16- or 32-bit pixel color resolution Web Browser* Internet Explorer 7.0 (or later) or Firefox 3.5 (or later); Internet Explorer 8.0 (or later) is recommended for configuring analytics Media Player† Pelco Media Player‡ or QuickTime® 7.6.5 for Windows XP, Windows Vista, or QuickTime 7.6.4 for Mac OS X 10.4 ANALYTICS Required Systems for Pelco Analytics Pelco Interface WS5200 Advanced System Management Software on an Endura 2.0 (or later) system Open API The Pelco API can transmit behavior alarm data to third-party applications, available at pdn.pelco.com *Internet Explorer is not supported by Mac OS X 10.4. † This product is not compatible with QuickTime version 7.6.4 for Windows XP or Windows Vista. If you have this version installed on your PC, you will need to upgrade to QuickTime version 7.6.5. ‡ Pelco Media Player is recommended for control, smoothness, and reduced latency as compared to QuickTime. Available Resolutions Resolution MJPEG H.264 High Profile (IP GOP structure) MPx Width Height Aspect Ratio Maximum IPS Recommended Bit Rate (Mbps) Maximum IPS Recommended Bit Rate (Mbps) 1.30 1280 960 4:3 20 12.00 20 3.00 0.92 1280 720 16:9 30 12.00 30 2.90 0.49 800 608 4:3 20 5.15 20 1.75 0.31 640 480 4:3 20 3.25 20 1.20 0.23 640 352 16:9 30 3.60 30 1.15 0.18 480 368 4:3 20 1.85 20 0.75 0.13 480 272 16:9 30 2.05 30 0.75 0.08 320 240 4:3 20 0.80 20 0.40 0.06 320 176 16:9 30 0.90 30 0.35TECHNICAL SPECIFICATIONS GENERAL Construction Back Box Aluminum Dome Drive Aluminum, thermo plastic Lower Dome Acrylic Light Attenuation Smoked f/0.5 light loss Clear Zero light loss Cable Entry (back box) In-Ceiling 0.75-inch conduit fitting Pendant Through 1.5-inch NPT pendant mount Weight (approximate) Unit Shipping In-Ceiling 2.4 kg (5.2 lb) 3.6 kg (8 lb) Environmental In-Ceiling 2.8 kg (6.2 lb) 4.5 kg (10 lb) Standard Pendant 3.0 kg (6.5 lb) 5.0 kg (11 lb) Environmental Pendant 3.5 kg (7.6 lb) 5.4 kg (12 lb) Environment In-Ceiling Indoor Environmental In-Ceiling Outdoor Pendant, Standard, and Environmental Indoor/outdoor Operating Temperature In-Ceiling 0° to 50°C (32° to 122°F) Standard Pendant (Assumes no wind chill factor) Maximum 45°C (113°F) absolute maximum; 35°C (95°F) sustained maximum Minimum –4°C (25°F) sustained minimum Environmental In-Ceiling, Environmental Pendant (Assumes no wind chill factor) Maximum 60°C (140°F) absolute maximum; 50°C (122°F) sustained maximum Minimum –51°C (–60°F) absolute minimum; prevents icing at sustained minimum of –30°C (–22°F); de-ices 2.5 mm (0.1 in.) within 3 hours after power-up at –30°C (–22°F) Effective Projected Area (EPA) 20.5 square inches (without mount), 47 square inches (with IWM Series mount) MECHANICAL (Dome Drive Only) Variable Speed 0.1° to 400° Preset Accuracy ±0.1° Pan Movement 360° continuous pan rotation Vertical Tilt +0° to –90° Manual Pan/Tilt Speeds Pan 0.1° to 80°/sec manual operation, 150°/sec Turbo Tilt 0.1° to 40°/sec manual operation Preset Speeds Pan 400°/sec Tilt 160°/sec ELECTRICAL Ports RJ-45 connector for 100Base-TX Auto MDI/MDI-X Autonegotiate/Manual setting Cabling Type Cat5 or better for 100Base-TX Input Voltage 18 to 32 VAC; 24 VAC nominal 22 to 27 VDC; 24 VDC nominal Input Power 24 VAC 23 VA nominal (without heater); 73 VA nominal (with heater) 24 VDC 0.7 A nominal (without heater); 3 A nominal (with heater) PoE IEEE802.3af (without heater) Fuse 1.25 ATECHNICAL SPECIFICATIONS SYSTEM MODEL NUMBERS COMPONENT MODEL NUMBERS *Use the pendant lower domes with the environmental in-ceiling and environmental pendant back boxes. CERTIFICATIONS/RATINGS/PATENTS • CE, Class A • FCC, Class A • UL/cUL Listed • C-Tick • U.S. Patents 5,931,432; 6,793,415 B2; 6,802,656 B2; 6,821,222 B2; 7,161,615 B2 • Meets NEMA Type 4X and IP66 standards when installed properly (B5-F-E and B5-PG-E) • ONVIF 1.02 Type Back Box Color Lower Dome HD, 1.3 MPx, 18X Color In-ceiling, indoor Black with white trim ring Smoked S5118-FW0 Clear S5118-FW1 In-ceiling, environmental Black with black trim ring Smoked S5118-YB0 Clear S5118-YB1 Pendant, standard Gray Smoked S5118-PG0 Clear S5118-PG1 Black Smoked S5118-PB0 Clear S5118-PB1 Pendant, environmental Gray Smoked S5118-EG0 Clear S5118-EG1 Back Box Lower Dome* Dome Drive B5-F HD, in-ceiling, gray LDHQF-0 High-quality, smoked, in-ceiling D5118 HD, 1.3 Mpx, 18X optical zoom B5-F-E HD, environmental in-ceiling, gray LDHQF-1 High-quality, clear, in-ceiling B5-PG HD, pendant, gray LDHQPB-0 High-quality, smoked, pendant B5-PB HD, pendant, black LDHQPB-1 High-quality, clear, pendant B5-PG-E HD, environmental pendant, grayPelco by Schneider Electric 3500 Pelco Way, Clovis, California 93612-5699 United States USA & Canada Tel (800) 289-9100 Fax (800) 289-9150 International Tel +1 (559) 292-1981 Fax +1 (559) 348-1120 www.pelco.com TECHNICAL SPECIFICATIONS RECOMMENDED MOUNTS In-Ceiling Domes SD5-P 2' x 2' drop ceiling panel, aluminum construction; replaces 2'þx 2' ceiling tile SCA1 Support rails for B5-F; for use in ceiling tile applications Pendant Domes BB5-PCA-BK Pendant conduit adapter, black BB5-PCA-GY Pendant conduit adapter, gray IWM Series Wall mount, with or without integral 24 VAC, 100 VA transformer; black or gray finish; can be adapted for corner, parapet or pole application MRCA Ceiling mount, black PP4348 Parapet roof mount PP350/PP351 Parapet wall/roof mount SWM Series Compact wall mount, black or gray finish; can be adapted for corner or pole applications OPTIONAL ACCESSORIES ALM-1 External alarm accessory AUD-1 External audio accessory MCS Series Indoor, 24 VAC power supply WCS Series Outdoor, 24 VAC power supply Refer to individual power supply specifications for more information.